How to Shave with an Electric Razor-Beginners Guide & Shaving Tips
Have a close and fast backup, do it. Although electric razors can reduce time and blood, they can still cause problems when you try to shave perfectly. If you rely on every day, shaving is one of the activities not to be missed.
It is also important to know how to properly use an electric shaver to get a maximum shave. Of course, you also need your own preparation and monitoring, which is the best way to optimize your electric shaver.
When you know how to use an electric razor your way, your day will be clearer and more aesthetic than before.
Here are some rules to follow when using an electric shaver:
Always be ready
This article will be entirely devoted to the shaving technique. Although beginners should get the most out of these tips. I think experienced users of electric razors will also find some useful information here.
Let’s get right to the point.
The 3 pillars of a quality shave
- 1 The 3 pillars of a quality shave
- 2 How to shave with a foil shaver
- 3 How to shave with an electric rotary razor
I’ve only been using electric razors for 15 years and have tried almost everything in terms of technique and electric razors.
My conclusion? The key to a close and comfortable shave is to master the basics and stay simple.
We can divide the shave with an electric razor into three separate parts, all of equal importance.
- The current shave
- Post-shave treatment
As you might have guessed, in this post, we will take care of the second part, shaving. I highly recommend reading the other two resources linked above because they will have a major impact on your results.
That said, let’s see how to shave with an electric razor without irritation and while getting a close shave.
In addition, because rotary and grid razors have different working and operating modes, we will treat each separately.
Choosing an Electric Shaver
When it comes to choosing an electric shaver, you have several different options, so it’s important to take the time to decide which one is right for you. To begin, you must decide if you shave wet or dry.
The majority of electric razors can only be used when the face is dry, but it can often cause irritation and/or razor bumps, while there is also a debate about how to shave closer. To give you some options, you can still use it either wet or dry.
The other choice is to choose a razor with a grid or a flexible razor with several cutting heads. Again, it’s really a matter of preference, it’s safe to say that rotary shavers are significantly more popular and often easier to use.
We have done many tests and research on the subject of men’s electric shavers. Be sure to check so you do not waste your money.
How to shave with a foil shaver
The Foil razors are made of thin blades that move extremely fast on the sides behind a perforated metal screen.
The hairs enter through the perforations of the leaf and are cut cleanly by the blades.
Aside from perforated sheets, almost all modern sheet razors include a mower.
The Achilles heel of almost all electric razors is long facial hair. Therefore, stubble is a prerequisite for a good shave with an electric razor, especially if you are using a razor grill.
And that’s because leaf razors tend to treat less hair than rotary shavers.
If for any reason, you shave every three days or more, it is recommended to trim your beard with a regular hedge trimmer before shaving.
This is probably the most important aspect of shaving with an electric razor. Use your free hand to determine the direction in which your beard is growing and always shave against it.
Do not shave against the current will result in a poor shave in terms of proximity and will probably leave stray hair behind. After a while, you will have a mind map with the grain direction of your beard and you will not have to feel it with your hand.
Your electric shaver works best when held at 90 degrees and in constant contact with the skin.
The hairs will stay straight and will be captured by the razor. In addition, the skin will be firmer, which will reduce the risk of irritation. You can lean your head back while raising your chin to shave your neck or just below the jaw.
You can also use your tongue to press against the inside of your lips or cheeks. It is a very effective way to stretch the skin over your upper lip, for example. These stretching tips also apply to rotary shavers.
Depending on the direction of the grain and the area you are shaving, shorter and stronger strokes can be more effective.
For example, if you shave a wide and relatively flat area like your cheeks, you can escape with longer runs, especially if the direction of the grain does not vary too much.
When shaving an area with many whisker growth patterns, it is best to do very short strokes, constantly adjusting the direction or even pressure. Which brings us to the next point.
The shaver head of most razors is inclined towards the front of the shaver. You can use this to your advantage to shave certain areas. For example, I always return my razor (holding it with my back facing up) when shaving under my nose.
I also incline it further towards one of the two outer foils. This allows a single sheet to remain in contact with the skin without any of the other cutting elements hindering.
It is a more advanced technique that can certainly improve the proximity of shaving in some difficult areas.
This goes against the first point, but your pressure tolerance tends to depend on the sensitivity of the skin and razor you use. Some forgive more than others (for example, a Braun Series 7 or Braun Series 9 is softer for the skin than a Panasonic Arc 4 or 5) and you can try to increase the pressure by very small increases to get a shave closer.
Try experimenting to see what works best for you, but I can not stress enough that you should only do it gradually and if you do not feel uncomfortable.
Small cuts and nicks can occur if you press too hard, as small pieces of your skin actually penetrate through the perforations of the leaves and a very thin layer of skin cells is scraped off.
You should also start with the most difficult and irritating areas, such as your neck. These require more attention and effort. It is, therefore, a good idea to dismiss them beforehand. Again, this applies to electric shaving in general, regardless of your preference for grid or rotary shavers.
How to shave with an electric rotary razor
The rotary shaver has been made popular by Philips Norelco and uses circular blades that rotate behind metal protectors.
These protectors have holes and slots to capture short hairs and long hairs which are then cut close to the skin by the rotating internal blades.
The vast majority of modern rotary shavers are configured with three individual shaving heads.
The way in which we should modify the shaving techniques presented above is a direct result of the design and operation of rotary shavers.
The reason behind this is simply to catch more hair effectively. Although circular movements are the largest part of your shave, you are not limited by it. In fact, you should probably use (and I strongly recommend) back and forth movements to make sure you get all the hair growing in different directions.
Use what suits you best. Although I am touched, I think it is important to repeat it explicitly. All the articles I’ve met say unequivocally that you should only use circular patterns with rotating razors.
However, if you follow this, you can do yourself a disservice and limit your improvement. Change things and experiment with different moves to get the best results.
This is especially important with rotary shavers, as they seem less tolerant than sheet razors when you apply more pressure. Although in the case of grid razors, a little more pressure can help you get a smoother shave.
It does not seem to work the same way with rotary shavers and most of the time, that would only create additional discomfort. So, a light and sweet shot is the way to go.
Excess foam and locks of hair will clog the razor and have a negative impact on the quality of the shave. The same goes for the use of a leaf razor with cream or gel.
How to Shave with an Electric Razor: Tips for a Closer Shave
Once you have prepared your face and are ready to shave, here are some basic tips that will help you shave closer, whether you do it with or without rain.
Then, once the shave is done, it is best to follow up using a good lotion or aftershave to help prevent the common problem of irritation. Once again, we have done all the research for you, so do not hesitate to check out our articles on the best after-shaves and the best aftershave balms.
You’ve probably been told almost all your life that you should always shave with the grain, but the opposite is true for electric shavers, which always give better results when you shave in the front.
If you do not know where the grain is going, put your hand on your face. The direction in which it seems rough is against the grain, while the smooth direction is that of the grain.
Holding the shaver perpendicular to your face will help ensure maximum skin contact, allowing you to work faster and more thoroughly.
One of the most important elements to get the closest shave possible with an electric razor is to use your spare hand to tighten your skin while shaving. This helps straighten the hair and will prevent you from tearing it instead of cutting it off.
If you use a foil shaver, you only need to shave in up and down movements. On the other hand, rotary shavers must always be used in small circular motions.
One of the major problems of most electric razors is that they tend to become excessively hot in a short time, usually before the completion of the work. It is for this reason that it is a good idea not to forget first the most sensitive areas (the most sensitive to irritations, like the neck).
A Quick Note on Maintaining Your Electric Razor
One of the most important factors that will affect the quality of shaving is the quality of the maintenance of your electric shaver. Like any other tool, it requires special care for it to work optimally.
This includes making sure to clean all the hair of the head after each use. Some models come with a detachable head for easy cleaning, but anyway, you must use a brush to completely clean the head to prevent it from clogging. If the head comes off, you may also be able to run it under water to clean it (be sure to read the manual to see if this is possible).
You will also need to use a specially designed lubricant on the blades after each shave to keep them precise and move smoothly. It is also a good idea to replace the grid on the grid razors or the screens on the rotary razors every 1 to 2 years for the best results. Read Full Guide
How to Use an Electric Razor: One Final Tip
If you have never used an electric shaver before, it will probably take a few weeks before your skin gets used to your new shaver. You can expect additional irritation during this period.
However, not only that, but it will also take a few weeks to use a new shaver before you can get the shave as close as possible over time the oils of your skin mix with those of the razor, which end up by that it cuts better.
Learning to shave well with an electric razor is not at all difficult, and it can offer pretty obvious benefits in terms of not spending so much time on a wet shave.
Like any method, it also has drawbacks, but you have at least a better idea of how to avoid the most common pitfalls associated with electric razors.
If you shave your head or if you plan to shave your head, there is also an excellent electric shaver. Be sure to check out our article on what we found to be the best electric shavers for your head.